Set the scanner to check one channel every two seconds while scanning. Your WS1040 will detect the NAC that is being used on a P25 conventional digital channel, and allow you to program NAC codes to block transmissions that do not have a matching NAC, including analog traffic on the same frequency.Īllows users to backup data, update database and program scanner directly from a PC. P25 Network Access Code (NAC) is used to provide selective squelch operation on conventional digital channels. All are programmed and stored in the same way. Both talkgroup and individual call monitoring are supported.Įxclusive to Whistler designs, features common data entry, browsing and control methods are used for every scannable object. Scans most common trunked radio system signaling formats, including Motorola, EDACS, LTR and P25 trunked radio networks. Menu Driven Programming with Context Sensitive HelpĮach menu item provides a few lines of help text that provide assistance with programming and using the scanner.Enter the LTR system frequencies in any order, and the WS-1040 will automatically move the frequencies to the proper home repeater slots as transmissions are received on the system.įrequencies remain stored in memory for an extended time even without batteries. Takes the guesswork out of programming LTR trunking systems when the home repeater order is not known. Skip over specified channels or frequencies when scanning or searching. Lock the scanner’s keys to help prevent accidentally changing the scanner’s programming. Clones with another WS1040 handheld or with another WS1065 desktop/mobile scanner. High speed special USB to scanner programming cable included. Use a USB Scanner programming cable for full duplex mode at 6 times the speed of previous scanner models for PC transfer and 8 times the speed of previous models for radio to radio cloning. This differs from low cost and older scanners that had memory organized in rigid and wasteful memory banks. Also connect an external antenna for improved reception of distant or weak signals.Īllocation of memory dynamically and efficiently as it is needed. Provides reception of strong local signals. Instantly compensates for low user audio levels that are common on digital systems. No cumbersome manual adjustments are required.Įasy to read and program data even in low light situations.Īllows transfer of the programmed data to another WS1010 scanner. When monitoring P25 digital systems, instantly adapts the digital decoder to the digital modulation format of the transmitted signal, then analyzes the signal over 50 times each second and adapts to any subtle changes caused by multipath or fading. Can be used in conjunction with, or separately from, the Alert LED described above. Programmable audible alarms can be configured to sound when certain Scannable Objects are active. Eight user-defined colors can be specified from thousands of possible combinations. Programmable multi-color LED can be configured to illuminate or flash when certain objects are active.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |